We are a professional manufacturer of molecular sieve and catalyst...
Add: Jiading District, Shanghai Zhujiaqiao rain Heping Road 1138
P.C. : 201815
Contact: Gu Yongqiu, Gu Qilin
Phone: 13636695882, 13701737980
Tel: 021-59961761, 59961326
Fax: 021-59963068
E-mail: webmaster@cnshyz.com
1. Performance:My factory production 5A molecular sieve,is refers to the A crystal structure the potassium,can adsorb the cut off diameter 5A molecule,Formual:Ca45Na3[AIO2]12(SIO2)12]·XH2O
2.Typical applications:Used in the air purification preparation,the rich oxygen,the oxygen nitrogen separation,is constructing the alkanet the separation the natural gas only makes,and may through a selective adsorption process,but and ring-like center separates the alkanet from a healthy hydrocarbon,Now is on industry is used in large-scale press Wan Ting to separate process,all may adsorption is in 3A the member of the type of 4A,can be inhaled by 5A.
Item | Pellet(mm) | Sphere(mm) | |||
Ø1.5-1.7mm | Ø3-3.3mm | Ø2.0-2.8mm | Ø2.8-4.75mm | ||
Wear ratio%≤ | 0.2 | 0.2 | 0.15 | 0.15 | |
Bulk densityg/ml | 0.7 | 0.7 | |||
ratio% | 98 | 94 | 98 | 98 | |
Static water adsorption% | 21 | 21 | 23 | 23 | |
Ethylene adsorb% | 12.5 | 12.5 | 13 | 13 | |
Crushing | Unit area resistant to | 23 | 23 | 40 | 80 |
strength | compression garrulous | ||||
strength N/mm2 | |||||
Coefficient of variation | 0.3 | 0.3 | 0.3 | 0.3 | |
Packing water % | 1.5 | 1.5 | 1.5 | 1.5 |
GB13550-92National standard
Item | Sphere(mm) | ||||
Ø2.0-2.8mm | Ø2.8-4.75mm | ||||
A level | Quality products | A level | Quality products | ||
Wear ratio%≤ | 0.35 | 0.5 | 0.35 | 0.6 | |
Bulk densityg/ml | 0.66 | 0.62 | 0.66 | 0.62 | |
ratio% | 96 | 95 | 96 | 95 | |
Static water adsorption% | 20 | 19 | 20 | 19 | |
Ethylene adsorb% | 12 | 10.5 | 12 | 10.5 | |
Crushing | Unit area resistant to | 30 | 25 | 60 | 50 |
strength | compression garrulous | ||||
strength N/mm2 | |||||
Coefficient of variation | 0.3 | 0.4 | 0.3 | 0.4 | |
Packing water % | 1.5 | 1.5 | 1.5 | 1.5 |
Item | Pellet(mm) | ||||
Ø1.5-1.7mm | Ø3-3.3mm | ||||
A level | Quality products | A level | Quality products | ||
Wear ratio%≤ | 0.35 | 0.5 | 0.55 | 0.6 | |
Bulk densityg/ml | 0.64 | 0.6 | 0.64 | 0.6 | |
ratio% | 98 | 94 | 94 | 90 | |
Static water adsorption% | 20 | 19 | 20 | 19 | |
Ethylene adsorb% | 12 | 10.5 | 15 | 10.5 | |
Crushing | Unit area resistant to | 22 | 20 | 17 | 15 |
strength | compression garrulous | ||||
strength N/mm2 | |||||
Coefficient of variation | 0.3 | 0.3 | 0.3 | 0.3 | |
Packing water % | 1.5 | 1.5 | 1.5 | 1.5 |
Regeneration condition
My factory production 3A, 4A, 5A, the 13X molecular sieve may use the method which heats up and at the same time blows sweeps or pumps out, the regeneration but to duplicate uses.
1.Removes the moisture: May use the dry gas like nitrogen, the air, the hydrogen, the saturated fire-damp and so on to heat up to 150-320 ℃ in 0. 3-05KG/C □under the O pressure passes over the dry cold gas approximately for 2-3 hour, isolates spatially air cooled to the room temperature.
2.Removes the organic matter: But the water used vapor substitutes first the adsorb ate after the molecular sieve, then heats up to (1) carries on, the regeneration also may in 200-350 ℃ hot vapor or the thermal inertia gas through the regeneration, (has not been able to use explosive mixture gas which and adsorbate contact produces).
3.Removes the gas matter to be possible to use the reduced pressure to escape the division regeneration.